Gaorun – Line Automation
Gaorun – Line Automation
AUTO BUSSING
The cell induction soldering head is used to inter connect...
AUTOMATIC 4 IN 1 FRAMING MACHINE
AUTOMATIC 4 IN 1 FRAMING MACHINE Automatic aming of components ...
AUTO TRIMMING
Cut the excess backplane and EVA around the laminated assembly
INLINE HIPOT
Store standard component versions for automatic calibration of IV testing.
ROBOTIC LAYUP
The string-welded battery is automatically laid by the robot
AUTO TAPPING MACHINE
Automatically tape the assembly
AUTO CORNER MILLING
Polish the toughness angle of the component in the finished frame
AUTO JBOX SOLDERING
Automatic glue of junction box (with A/B mixed glue machine)
AUTOMATIC GLASS LOADING
Automatically absorb the glass to the assembly line & automatically remove the glass separator
EVA / TPT CUTTING MACHINE
Auto-trim EVA / TPT for the assembly
BUFFER(SHORT/LONG SIDE)
The device is used for the storage of components. Before the current station component flows away...
2ND GLASS LOADING MACHINE
The suction cup is used to absorb the second-floor glass of the double-wave assembly after the closing sheet.
GLASS UNLOADER
The suction cup is used to absorb the second-floor glass of the double wave component after the sheet to repair
EDGE BONDING MACHINE
High temperature tape is used to seal the four sides of the double glass assembly before lamination
90D FLIP INSPECTION
The device uses 12 sets of LED lamps on the back to detect hidden cracks and impurities inside the assembly
AUTOMATIC SORTING
Flip the assembly to facilitate the rear channel cleaning station